Print-on-Demand Size and Resolution Reference
Every print-on-demand supplier publishes its own template, and the numbers change between products, brands and even production batches. This reference collects the typical ranges sellers run into, explains how to turn them into pixels, and shows what to check before you upload. Treat it as a planning aid, then confirm the exact figure in your supplier's current template.
How to turn a print size into pixels
Multiply each dimension in inches by the DPI. A 12 × 16 inch print area at 300 DPI needs 3,600 × 4,800 pixels. If a supplier gives dimensions in centimetres, divide by 2.54 first. Most suppliers ask for 150 to 300 DPI, and many accept lower values for very large items because the viewing distance is greater.
Typical print areas by product
| Product | Typical print area | Pixels at 300 DPI | Things to watch |
|---|---|---|---|
| T-shirt, front | Often up to about 12–14 in wide and 14–16 in tall | 3,600–4,200 wide | Transparent background, no white box around the design |
| Poster | 8×10, 11×14, 18×24, 24×36 in are common | 2,400×3,000 up to 7,200×10,800 | Add bleed if the template asks for it |
| 11 oz mug wrap | Roughly 9 × 3.5 in | About 2,700 × 1,050 | Keep text away from the handle area and the seam |
| Throw blanket | Commonly 50 × 60 in | 15,000 × 18,000 | Very large files; 150 DPI is often accepted |
| Golf towel | Commonly 16 × 24 in | 4,800 × 7,200 | Check hem and grommet areas |
| Throw pillow cover | Often 14–20 in square | 4,200–6,000 square | Corners may fall into the seam |
| Tote bag | Often about 12–15 in | 3,600–4,500 | Fabric texture can soften fine lines |
Source resolution: how big does the original need to be?
A file can only hold the detail it was created with. Enlarging a 1,000-pixel-wide image to 4,000 pixels adds pixels but not information, so edges look soft. As a rule of thumb, aim for a source at least as large as the target at 150 DPI. If it is smaller, either upscale with a method designed for it, such as an AI upscaler for raster art, or recreate the design as a vector (SVG, EPS or AI), which can be exported at any size without loss.
Safe area, bleed and cropping
- Safe area: keep important text and faces well inside the edge. Printers trim and shift products slightly.
- Bleed: if the template specifies bleed, extend backgrounds past the trim line by that amount.
- Aspect ratio: when your artwork and target have different proportions, decide whether to crop (fills the area) or fit (leaves margins) and check the preview before exporting.
File format checklist
- PNG for artwork with transparency or sharp graphics.
- JPEG for photographs and flat backgrounds where the supplier wants smaller files.
- PDF when the supplier asks for it, especially for vector artwork.
- Check the colour profile guidance. Most suppliers expect sRGB.
Before you upload
- Download the current template for the exact product and variant.
- Set the target size and DPI in the resizer and confirm the pixel dimensions.
- Position the artwork and check the crop in the preview.
- Export in the format the supplier requests and open the file to confirm its dimensions.
- Upload a test order or proof if the supplier offers one.
Related guides: DPI and pixels explained, how to resize artwork and blankets and golf towels.